Utility mode
2
Touch [General Settings].
3
Select a parameter to be set.
4
Specify the desired settings, and then touch [Enter].
–
To cancel changes to the settings, touch [Cancel].
A screen appears, requesting confirmation to change the settings.
5
Touch [Yes], and then touch [Enter].
–
If [Yes], then [Enter] was touched,
the machine is restarted and all
account track and user authenti-
cation data is initialized.
–
To exit the Account/Authentica-
tion screen, touch [Enter] in each
screen until the Basics screen
appears.
The Account/Authentication screen appears.
250/350
11
11-31