Konica Minolta bizhub 250 User Manual page 284

8
– If a button is pressed where no image is stored, the size of the
stored image appears on the button to indicate that an image has
been stored.
– To store the image with a number where an image is already stored,
delete the image, touch [Set], and then touch the button for the
number.
– To delete the image, touch [Delete], and then touch the button for
the number stored with the image.
5
Select the size of the area to be
scanned.
– To cancel changes to the set-
tings, touch [Cancel].
– Touch [Auto Detect] to automati-
cally detect the size of the area to
be scanned in the document im-
age.
– Touch [Custom Size] to display
the Custom Size screen. Touch
[X] or [Y], use the keypad to spec-
ify the size, and then touch [En-
ter].
– A value outside the allowable
range cannot be entered.
– To change the entered value,
press the [C] (clear) key, and then
enter the correct value.
6
Touch [Enter].
8-28
No program registered
Application functions
Program registered
250/350