Automatically Conserving Energy (Low Power Mode) - Konica Minolta bizhub 250 User Manual

2

Automatically conserving energy (Low Power mode)

If no operation is performed for a specified length of time, the touch panel
and the key indicators go off, and the machine enters a mode where it con-
serves energy.
This is the Low Power mode.
The machine can receive jobs even while it is in Low Power mode.
As the factory default, the machine enters Low Power mode after 15 minutes.
To recover from Low Power mode
1
Press any key in the control panel or touch the touch panel.
– The Low Power mode can also be canceled by opening the original
cover or loading a document into the ADF.
2
The machine can receive jobs while it is warming up.
– The touch panel comes on again and, after the machine has fin-
ished warming up, it is ready to begin printing (within 14 seconds at
normal room temperature (23 °C)).
!
Detail
The length of time until the machine enters Low Power mode can be set
from Utility mode. For details, refer to "Low Power Mode" on page 11-14.
2-30
Before making copies
250/350