Original Documents; Documents That Can Be Loaded Into The Adf; Precautions For Loading Documents Into The Adf - Konica Minolta bizhub 250 User Manual

7
7.3

Original documents

When making copies, load the document into the ADF or position it on the
original glass.
To copy documents that cannot be loaded into the ADF, position them on
the original glass.

Documents that can be loaded Into the ADF

There are two methods for using the ADF.
- Normal method
- For documents of mixed sizes
There are limits on the types of documents that can be loaded with each
method.
Normal method
Document paper type/
Weight
Document size
Paper capacity
For documents of mixed sizes
Document paper type/
Weight
Document size
Paper capacity

Precautions for loading documents Into the ADF

The following types of documents should not be loaded into the ADF, other-
wise paper misfeeds or damage to the document may occur.
- Wrinkled, folded, curled, or torn documents
- Highly translucent or transparent documents, such as overhead trans-
parencies or diazo photosensitive paper
- Coated documents such as carbon-backed paper
- Documents printed on paper thicker than 129 g/m
- Documents that are bound, for example, with staples or paper clips
- Documents that are bound in a book or booklet
- Documents that are bound together with glue
- Document pages that have had cutouts removed or are cutouts
- Label sheets
7-16
Single-sided documents
Plain paper:
35 g/m to 128 g/m
2 2
A3 w to B6 w
80 sheets (80 g/m paper)
2
Single-sided documents
Plain paper: 50 g/m to 128 g/m
2
Refer to "Copying documents of mixed sizes ("Mixed Original" set-
ting)" on page 3-16.
80 sheets (80 g/m paper)
2
Copy paper/original documents
Double-sided documents
Plain paper:
50 g/m to 128 g/m
2
Double-sided documents
2
2
2
250/350