Konica Minolta bizhub 250 User Manual page 232

6
Specifications
Warm-up time
Image loss
First copy
Copy speed
Magnification ratios
Multiple copies
Density control
Power requirements
Power consumption
Energy efficiency
Dimensions
Space requirements
Memory
Weight
*1
Energy efficiency when the Low Power mode is set to 1 minute and the
Sleep mode is set to 1 minute
*2
The indicated spaced requirements represent the space required to fully
extend the bypass tray.
In order to incorporate improvements, these product specifications are sub-
ject to change without notice.
6-4
Less than 24 seconds after the machine is turned on with
the main power switch (less than 26 seconds if the fax kit
or scanner kit is installed)
Less than 14 seconds after the [Power] (auxiliary power)
key is turned on
*At room temperature (23°C (73.4°F))
Leading edge: 4 mm; Trailing edge: 4 mm;
Rear edge: 4 mm; Front edge: 4 mm
bizhub 250:
5.3 seconds or less (with Letter v paper fed from the 1st
tray)
bizhub 350:
4.8 seconds or less (with Letter v paper fed from the 1st
tray)
bizhub 250:
25 ppm (with A4 v)
bizhub 350:
35 ppm (with A4 v)
Full size ("×1.0"): ×1.000
Enlarge: ×1.154, ×1.414, ×2.000
Reduce: ×0.816, ×0.707, ×0.500,
Minimal (×0.930)*
Zoom: ×0.250 to ×4.000 (in 0.001 increments)
Stored zoom ratios: 3
*"Minimal" zoom ratio (between ×0.900 and ×0.999)
1 to 999 sheets
Manual density adjustment (9 levels)
Automatic density adjustment (5 levels)
AC 220-240 V, 6.1 A +10% or less, 50 Hz
1,300-1,470 W ±10% or less
bizhub 250: 27 wh/h, bizhub 350: 31 wh/h
* 1
677 mm (W) × 710 mm (D) × 718 mm (H)
987 mm (W) × 710 mm (D)
* 2
Standard memory: 192 MB; For files: 32 MB
Approx. 74 kg
Specifications
250/350