Interrupting A Copy Job (Interrupt Mode); To Interrupt A Copy Job - Konica Minolta bizhub 250 User Manual

4
4.3

Interrupting a copy job (Interrupt mode)

The current jobs can be temporarily interrupted so a document can be cop-
ied with different copy settings.

To interrupt a copy job

1
Position the document to be copied. (Refer to page 3-8 for details.)
2
Press the [Interrupt] key.
– If a job is being printed, the mes-
sage "Job is stopping." appears.
The indicator on the [Interrupt] key
lights up in green and printing of the
current job stops.
?
What happens if the [Interrupt] key is pressed while a document is
being scanned?
% Pressing the [Interrupt] key returns all copy settings, except the
number of copies, to their defaults.
3
Select the desired copy settings.
4
Press the [Start] key.
Printing begins for the job that the previous job was interrupted for.
5
After the interrupting job has finished printing, press the [Interrupt] key.
The indicator on the [Interrupt] key goes off.
The copy settings return to those specified before printing was inter-
rupted.
Note
If the interrupting job is cancelled, printing for the interrupted job auto-
matically restarts.
4-8
Additional copy operations
250/350