Loading Paper Into The Bypass Tray; To Load Paper (Bypass Tray) - Konica Minolta bizhub 250 User Manual

2
2.6

Loading paper into the bypass tray

Paper can be fed manually through the bypass tray if you wish to copy onto
paper that is not loaded into a paper tray, or if you wish to copy onto thick
paper, postcards, envelopes, overhead projector transparencies or label
sheets.

To load paper (bypass tray)

1
Open the bypass tray.
– When loading large-sized paper,
pull out the tray extension.
2
With the side to be printed on facing down, insert the paper as much
as possible into the feed slot.
3
Slide the lateral guides to fit the size
of paper being loaded.
– Do not load so many sheets that
the top of the stack is higher than
the , mark. A maximum of 150
sheets of plain paper can be
loaded.
– Slide the lateral guides firmly up
against the edges of the paper.
? How is curled paper loaded?
% Flatten the paper before loading it.
4
Select the paper type.
? What paper type is selected
when label sheets are loaded?
% Select "Thick".
2-46
Before making copies
Tray
extension
Lateral guides
250/350