Scanner Dry; Crease/Center Staple; Default Screen - Konica Minolta bizhub 250 User Manual

Utility mode

Scanner Dry

Tab
5/6

Crease/Center Staple

Tab
5/6
Note
The "Crease/Center Staple" parameter appears only if optional finisher or
saddle stitcher is installed.

Default Screen

Tab
6/6
Note
The names of parameters and settings may be different when fax kit is
installed.
250/350
Parameter Description
Scanner Dry Specify the time (hour and minutes)
when scanner dehumidifying is automat-
ically performed in order to prevent con-
densation from forming on the scanner
with sudden temperature changes.
Parameter Description
Crease/ Specify the crease and center staple po-
Center Staple sition for each paper size.
Select a paper size to be set, and then
touch [Enter].
• Crease:
• Center Staple:
Parameter
Default Default
Screen LCD
Screen
Default E-
mail
Screen
Specify the position of the fold (be-
tween -10 and +10).
Specify the position of the center sta-
ple (between -10 and +10).
Description
Select one of the following as the
mode screen given priority.
Copy, E-Mail, Scanner
Select one of the following as the
Fax mode screen given priority.
One-Touch, Search, Address In-
put
11
Default setting
Not specified
Default setting
Crease: 0
Center Staple: 0
Default setting
Copy
One-Touch
11-19