Loading Paper Into The Lct; To Load Paper (Lct) - Konica Minolta bizhub 250 User Manual

2
2.5

Loading paper into the LCT

To load paper (LCT)

0 If the [Power] (auxiliary power) key is turned off, even though the main
power switch is on, the LCT cannot be pulled out, even after the tray re-
lease button is pressed. Be sure that the machine is turned on with the
[Power] (auxiliary power) key.
1
Press the tray release button.
2
Pull out the LCT.
3
Load the paper into the right side of
the LCT so that the side of the paper
to be printed on (the side facing up
when the package was unwrapped)
faces up.
– Do not load so many sheets that
the top of the stack is higher than
the , mark. A maximum of 2,500
sheets can be loaded.
?
How is curled paper loaded?
% Flatten the paper before loading it.
2-44
Before making copies
Film
250/350