Konica Minolta bizhub 250 User Manual page 178

4
4
Touch the button for the program number where a program is to be
registered.
– If a program has not yet been registered with the program number
button that is pressed, the empty icon disappears from the number
button to indicate that a program is registered with it.
– If a program has already been
registered with the program
number button that is pressed, a
message appears, requesting
confirmation to overwrite the pro-
gram. To overwrite the program,
touch [Yes], and then touch [En-
ter]. To cancel the registration,
touch [No], and then touch [En-
ter].
? What if programs have already been registered to all of the program
numbers?
% If there are no program numbers where no program has been reg-
istered yet, the program registered at a program number will be
overwritten. To check the copy program settings before overwriting
it, refer to "Checking the copy settings (Mode Check)" on page 4-3.
!
Detail
To stop registering the program, press the [Reset] key or the [Mode Mem-
ory] key. No matter which screen is displayed, the registration is can-
celled.
4-10
No program registered
Additional copy operations
Program registered
250/350