Punching Holes In Copies (Punch Settings) - Konica Minolta bizhub C250 User Manual

Basic copy operations

Punching holes in copies (Punch settings)

!
Detail
In order for holes to be punched in the copies, all of the following condi-
tions must be met.
The paper width must be 8-1/2 in. or between 11 in. and 11-3/4 in. (with
the "2-Hole" punch setting).
The paper width must be between 11 in. and 11-3/4 in. (with the "3-Hole"
punch setting).
The paper length must be between 7-1/4 in. and 17 in.
If the "Mixed Original" setting is selected, all copies must have the same
paper width.
If a Punch setting is to be selected, select the orientation in which the
document is positioned. If an Original Direction setting is not selected,
holes may not be punched in the copies as desired.
For details on specifying the document orientation, refer to "Selecting the
document orientation (Original Direction settings)" on page 3-24.
Note
Holes can be punched in the paper that is fed out if punch kit PK-501 is
installed on optional finisher FS-603 or punch kit PK-510 is installed on
optional finisher FS-514.
Paper Weight
16 lb to 55-1/2 lb
C250
Paper Size
2-hole: 11 × 17 w to 8-1/2 × 11 w/v
3-hole: 11 × 17 w, 8-1/2 × 11 v
3
3-77