SATO CG412DT Service Manual page 64

Section 4: Operation and Configuration
4.13 FACTORY ADJUSTMENT MODE (cont'd)
4.13.1 Output Data of the Factory Adjustment Test Print
The output data of the Factory Adjustment Test Print shows the internal operating parameters of the printer.
These output data are printed in three parts, each with the printing area of 115 mm [3.54"] (Width) x 115 mm
[3.54"] (Pitch), Standard.
First print-out
No.
1 Model
2 Firm Date
3 Firm Version
4 Barcode of firm version
5 Font Version
6 Barcode of font version
7 CONT/USB Serial
8 Barcode of CONT/USB
Serial
Second print-out
No.
1 Model
2 CONT/USB Serial
3 Interface 1
4 Interface 2
5 FROM1 CHECK SUM
6 Barcode of FROM1
CHECK SUM
7 Barcode of MAC
Address *1
*1 Printed by LAN model only.
Page 4-26
Print Item
Printer model name
Printer F/W creation date
Printer F/W version
Printer F/W version (Barcode)
Font version
Font version (Barcode)
USB serial No.
USB serial No. (Barcode)
Print Item
Printer model name
USB serial No.
Interface 1
Interface 2
Printer F/W: Font: Checksum
Barcode of Printer F/W: Font:
checksum
Barcode of MAC address.
Contents of the print data
CG408TT(*), CG412TT(*)
CG408DT, CG412DT
*: "T" is printed for thermal
transfer print.
"D" is printed for direct
thermal print.
YY.MM.DD
39.**.**.**
Print in CODE39
**.**(R)
Print in CODE39
********
Print in CODE39
Contents of the print data
CG408TT(*), CG412TT(*)
CG408DT, CG412DT
*: "T" is printed for thermal
transfer print.
"D" is printed for direct
thermal print.
********
USB
LAN/RS-232C/IEEE1284
(B)**** (P)****
(F)**** (A)****
Print in CODE39
Print in CODE39
CG4 Series Service Manual