3.2 RS232C HIGH SPEED SERIAL INTERFACE (cont'd)
Timing Chart (Single item buffer)
(1) Normal process
Power ON
Printer side
Initial
ER
STX..ETX(1)
RD
RS
Printer status
Receiving/Analysis/Editing(1)
(2) Error process
Head open
Printer side
ER
RD
RS
Printer status
* When the paper end has occurred: Open the head
Timing Chart (Multi item buffer)
(1) Normal process
Power ON
Printer side
Initial
ER
STX..ETX(1)
RD
RS
Printer status
Receiving/Analysis/Editing(1)
(2) Error process
Head open
Printer side
ER
STX
RD
RS
Online
Printer status
* When the paper end has occurred: Open the head
NOTE: When the head is closed, the paper end will be released.
CG4 Series Service Manual
td
Online
Print(1)
td: It takes the printer approx. 10μs to recognize the end of item and to start controlling ER.
Press the
Head close
FEED/LINE button
STX..ETX(1)
Offline
Receiving/Analysis/Editing(1)
NOTE: When the head is closed, the paper end will be released.
STX..ETX(2)
Online
Receiving/Analysis/Editing(2)
NOTE: For multi buffer mode, it is possible to continue data communications while printing.
Press the
Head close
FEED/LINE button
........
ETX(1)
Offline
Receiving/Analysis/Editing(1)
Press the
Press the
FEED/LINE button
FEED/LINE button
STX
........
Offline
Receiving/Analysis/Editing(2)
td
Online
Print(1)
Set the label
Close the head for feed operation.
Receive buffer
Receive buffer
near full occurred
near full release
STX
........
Receiving/Analysis/Editing(3)
Print(1)
Paper end
STX
........
Online
Print(1)
Set the label
Close the head for feed operation.
Section 3: Interface Specifications
td
ETX(2)
Online
Print(2)
Online
Offline
*
Print(1)
ETX(3)
STX
Offline
Receiving/Analysis/Editing(4)
Print(2)
Press the
FEED/LINE button
ETX(2)
Offline
Receiving/Analysis/Editing(2)
*
Print(1)
Press the
FEED/LINE button
........
ETX(4)
Online
Print(3)
Online
Print(2)
Page 3-5