SATO CG412DT Service Manual page 12

Section 2: General Specifications
MODEL NAME
MEDIA
(Be sure to use media manufactured or certified by SATO)
Type
Wind Direction
Roll and Core Diameter
Fanfold Max. stack height
Size
Thickness
Page 2-2
CG408 DT/ CG408TT
Direct Thermal / Thermal Transfer depending on print model (DT or TT)
Roll stock: Face In or Face out winding
Maximum outer diameter: 128 mm (5.04") with Inner core diameter: 40 mm (1.5")
* Inner core diameter: 19.05 mm (0.75") with maximum outer diameter: 110 mm
(4.33") can be accepted, but there is no performance guarantee.
Label
Continuous Pitch: 7 to 300 mm (0.27" to 11.8")
Pitch including liner: 10 to 303 mm (0.39" to 11.93")
Width: 22 to 107 mm (0.86" to 4.21")
Width including liner: 25 to 110 mm (0.98" to 4.33")
Cutter Pitch: 22 to 300 mm (0.87" to 11.8")
Pitch including liner: 25 to 303 mm (0.98" to 11.93")
Width: 22 to 107 mm (0.87" to 4.21")
Width including liner: 25 to 110 mm (0.98" to 4.33")
Dispenser Pitch: 22 to 100 mm (0.87" to 3.93")
Pitch including liner: 25 to 103 mm (0.98" to 4.05")
Width: 22 to 107 mm (0.87" to 4.21")
Width including liner: 25 to 110 mm (0.98" to 4.33")
Tear-off
Pitch: 22 to 300 mm (0.87" to 11.8") *
Pitch including liner: 25 to 303 mm (0.98" to 11.93")
Width: 22 to 107 mm (0.87" to 4.21")
Width including liner: 25 to 110 mm (0.98" to 4.33")
Linerless
Pitch: 25 to 100 mm (0.98" to 3.93") *
With: 25 to 110 mm (0.98" to 4.33")
Non-adhesive paper
Continuous
Pitch: 10 to 303 mm (0.39" to 11.93") *
Width: 25 to 110 mm (0.98" to 4.33")
Cutter
Pitch: 25 to 303 mm (0.98" to 11.93")
Width: 25 to 110 mm (0.98" to 4.33")
Tear-off
Pitch: 25 to 303 mm (0.98" to 11.93") *
Width: 25 to 110 mm (0.98" to 4.33")
1
* Media using small pitch must be torn by hand.
• The above size may be limited by use conditions, such as type of paper, usage
environment, and application.
• When using the dispenser mode, restrictions apply to the maximum paper length
according to paper installation conditions.
0.06 to 0.19 mm (0.0024" to 0.0074")
Roll stock or Fan-fold
118 mm (4.65") (external supply)
CG412 DT/ CG412TT
1
1
1
1
CG4 Series Service Manual