SATO CG412DT Service Manual page 61

4.12 FACTORY CLEAR MODE (cont'd)
No. Items to be initialized
18 Initial Feed
19 Auto Feed
20 Operation mode
21 Interface
22 Tear Off Waiting Time
*1. To be connected by Port1024 and Port1025 (2 port connections) or Port 9100 (1 port connection)
CG4 Series Service Manual
Disabled
Disabled
Continuous - (No setting)
Tear-Off - (No setting)
Cutter Mode 1 (Head position)
Dispenser Mode 1 (Head position)
Nonsepa (Linerless) Mode 2 (Tear off position)
RS-232C Baud rate=19200 bps, Data bit=8 bit, Parity=None,
Stop bit=1 bit, Protocol=Protocol for driver
LAN Protocol for driver (ENQ response mode) *1
USB - (No initial setting)
1000 ms
Section 4: Operation and Configuration
Setting value
Page 4-23