SATO CG412DT Service Manual page 36

Section 3: Interface Specifications
3.5 LOCAL AREA NETWORK (LAN) ETHERNET (cont'd)
3.5.6 TELNET Specifications
TELNET complies with RFC854. This consists of an interactive menu form, and it enables you to change and
refer internal setup and to display status. To change the setting details, enter 'root' user name and password
at the time of login. Default ROOT password is set to null (line feed only).
<TELNET command example>
In MS-DOS command prompt, type in [TELNET xxx.xxx.xxx.xxx (IP address)] and enter
user name and password to advance to the display below.
SATO PRINTER ModelName TELNET server.
Copyright 2006(C) SATO Corporation.
login: root
'root' user needs password to login
password:
User 'root' logged in
No. Item
---------------------------------------------------------------------------------------
1 : Setup TCP/IP
2 : Display status
99 : Exit setup
Please select(1-99)?
Each printer model name will appear in [Model Name].
For the detailed settings of [1:Setup TCP/IP], refer to Section 3.5.7 Setting/Displayed Items .
3.5.7 Setting/Displayed Items
The following table shows the settings and referable sections as well as various variables.
TCP/IP related settings
Variable identifier
IP address
Subnet mask
Gateway address
RARP protocol
DHCP protocol
Keep alive time
Socket cancel
ROOT password
Page 3-18
Value
Default (Factory setting)
0.0.0.0 (Externally obtained)
0.0.0.0 (Derived from IP address)
0.0.0.0 (Invalid)
ENABLE
ENABLE
180(sec)
Normal
NULL (No password)
(level.1)
Setting range
0.0.0.0 ~ 255.255.255.255
0.0.0.0 ~ 255.255.255.255
0.0.0.0 ~ 255.255.255.255
ENABLE/DISABLE
ENABLE/DISABLE
30 ~ 300
Normal / compatible
Up to 16 random alphanumeric
characters
CG4 Series Service Manual