Daikin R-410A Service Manual page 372

Disassembly and Maintenance
1.16.8 Removal of Heat Exchanger
1
Warning
Procedure:
Step
Before dismounting a heat
exchanger, make sure to
proceed pump down
refrigerant to outdoor unit and
disconnect the connection
pipe and wiring, then remove
3
the indoor unit.
1 Dismount top plate
2 Remove the 3 setting
screws for heat
exchanger and one
5 5
screw for pipe fixing box.
5–132
Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure
Top plate
ESIEN05-04
Points
(S1325)
There is a hock right hand side
behind the heat exchanger.
Part 5 – Disassembly and Maintenance