ESIEN05-04
Step
6
Put the heat exchanger
partition plate inside and
fix them with two screws.
7
Pass the thermistor ass'y
through the clamps and
the slit of partition plate
securely as the original
state.
Pass the lead wire of
motor also through the
clamp securely.
8
Insert the grounding
terminal to the header.
Part 5 – Disassembly and Maintenance
Procedure
Fan motor lead wire
Fan motor lead wire
Clamp
Slit of partition plate
Disassembly and Maintenance
Heat exchanger
partition plate
(S2672)
Clamps
Thermistor ass'y
(S2683)
(S2684)
Points
1
3
5
5
5–69