Daikin R-410A Service Manual page 270

Disassembly and Maintenance
Step
1
Caution during swing motor
installation
1. After installing the
swing motor, be sure to
turn off the power
supply for reset (for
initializing the vane
positions).
3
2 Be sure to engage the
gears on the motor side
and panel side.
(Improper gear
engagement results in
faulty swing operation
and abnormal noise.)
5 5
5–30
Procedure
Motor-side gear
Swing motor
Panel-side gear
Motor-side gear
Panel-side gear
ESIEN05-04
Points
Protect the connector section
with using the aluminum tape.
Part 5 – Disassembly and Maintenance