Removal Of Pc Board - Daikin R-410A Service Manual

ESIEN05-04

1.11.7 Removal of PC Board

Warning Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure:
Step
Remove the switch box
according to the procedure
for removing the switch box.
1 Remove 2 switch box
mounting screws to
open the box.
1 Disconnect the control PC
board.
1 Disconnect the 2
connectors between the
power supply and
control PC boards, then
draw the control PC
board out in the
direction shown by the
arrow.
2 Disconnect the inverter PC
board.
1 Disconnect the harness
from the 2 tabs
provided in the box.
2 Draw the inverter PC
board out in the
direction shown by the
arrow.
Part 5 – Disassembly and Maintenance
Procedure
Tabs
Disassembly and Maintenance
Points
5–33
1
3
5 5