Yamaha CE50T Service Manual page 69

INSPECTION AND REPAIR
I ENG
7. Measure:
oClutch shoe thickness ( ~
Out of specification-* Replace.
Clutch Shoe Thickness:
4.0 m m (0.16 in)
< W e a r L i m i t > :
2.5 m m (0.10 in)
A s s e m b l y
When assemblying the secondary sheave, reverse
the disassembly procedure. Note the following
points.
1. Apply:
+BEL-RAY Assembly Lube ®
(to the inside of the sliding sheave)
,!:,.~ .... ~+~i i i , s i = ~. .......
~; ++.
+.;+!:i:~!
2. Install:
• Sliding sheave
NOTE:
Be careful so that the oil seal lips are not turned
over when installing the sheave.
3. Apply:
eBEL-RAY Assembly Lube ®
(to the torque cam grooves and O-rings)
4. Check:
• Sliding sheave
Unsmooth operation-* Repair.
3-24