Yamaha CE50T Service Manual page 106

cA.. l CA"BO"ETO"
6. Inspect:
*Jet needle (_
"_'z//@"_b,_ '"_'_'d/'@ ,Main Bends/Wear-_ Replace.jet (_)
_ *Main nozzle (_)
_X _ *Pilot jet @
Contamination-* Replace.
/
®
7. Inspect:
eThrottle stop screw (_
Wear/Damage--* Replace.
O
"_._
%
8. Inspect:
*Starter plunger (_
// Wea r/Damage-_ Replace.
\
9. Measure:
®Float height @
Out of specification--* Inspect needle valve,
float and valve seat.
15.0-17.0 mm 10.59-0.67 in)
Float height measurement steps:
*Install the needle valve, float and float pin to
the carburetor body.
*Hold the carburetor in an upside down
position.
4-9