Yamaha CE50T Service Manual page 178

[ELECS,O°AL S STEM E
Main switch conduct check: I No
1. Disconnect main switch leads. ! continuity
2. Set Pocket Tester (YU-03112) selector to _ I
"9 x 1" position. _ I Replace main switch.
3. Connect tester leads to main switch leads
(Red lead, Brown lead).
Tester (+) lead-,Red lead
Tester ( - ) lead-,Brown lead
4. Turn main switch to "ON" position.
Poor
condition
Check bulb conditions of flasher lights, in- _1 Replace bulb(s)
dicator lights and tail/brake light.
Poor
Check entire signal system for connections I connection _l I
(Refer to
"WIRING DIAGRAM" section.) I
IF Correct,
i
Jv L°K
Poor
Check condition of each circuit for signal ____,.l,__ |
system (Refer to "SIGNAL SYSTEM TEST _i Replace poor condition electrical
AND CHECKS" section.) _ component(s).
6-41