Yamaha CE50T Service Manual page 68

F ~
y
2. Inspect:
oTorque cam groove (~)
oGuide pin (~
Wear/Damage-*Replace as a set.
®Oil seals (~
oO-rings (~)
Damage-* Replace.
,' If l! !f
3. Measure:
®Clutch spring free length (~
Out of specification-* Replace.
Clutch Spring Free Length:
109.6 m m (4.31 in)
< Limit > :
94.0 m m (3.70 in)
4. Inspect:
®Clutch housing inner surface
Oil/Scratches-* Remove.
Use a rag soaked in lacquer
Oil
thinner or solvent.
Use an emery cloth
Scratches
(lightly and evenly polishing).
5. Measure:
oClutch housing inside diameter (~)
Ouf of specification-*Replace.
r
Clutch Housing Inside D i a m e t e r :
105.0 mm (4.13 in)
< W e a r
Limit> :
105.4 mm (4.15 in)
6. Inspect:
oClutch shoes
Glazed parts-* Sand with coarse sandpaper.
NOTE:
After using the sand paper, clean of the polished
particles with cloth.
3-23