Yamaha CE50T Service Manual page 231

T
SIGNAL SYSTEM ELEC
2. Connect:
® Pocket Tester (YU-03112)
Set the tester selector to " ~ x 10" position.
3. Check:
®Fuel sender conduct
Refer to following table.
Not per result~Replace.
Float position Fuel sender resistance
Up (~ 4-10~
Down (~ 90 - 100~
NOTE:
Check from top to bottom.
Fuel M e t e r C h e c k
1. Connect:
• Fuel sender lead
2. Turn the main switch to "ON".
3. Check:
® Fuel meter
Refer to following table.
Not per result~Replace.
Float position Fuel meter position
Up (~) "F"
Down (~) "E"
NOTE:
Before reading the meter, stay put the float for
more than three minutes respectively at ( ~ and
®
--18--