Yamaha CE50T Service Manual page 152

[ELEC I
ELECTRICAL S T A R T I N G S Y S T E M
7. Check:
oArmature coil insulation
Set the pocket tester selector to " 9 × 1 K"
position.
Continuity--* Replace the starter motor as-
sembly.
Assembly
Reverse the removal procedure.
Note the following points.
1. Install:
~Brush
®Brush spring
Using a thin screw driver.
2. Install:
oArmature coil assembly
3. Install:
=O-ring (New)
6-15