Yamaha CE50T Service Manual page 159

'ON'T'ON SYSTEM I E'EC I I
Source coil resistance test:
1. Disconnect C.D.I. magneto leads.
2. Set Pocket Tester (YU-03112) selector to
"~3 × 100" position.
3. Connect tester leads to source coil leads.
Tester ( + ) lead-*Black/Red lead
Tester ( - ) lead-*Black lead
4. Measure:
eSource coil resistance
|
216-264~3 at 20°C (68°F)
~v~ OK
Pick-up coil resistance test:
1. Set Pocket Tester (YU-03112) selector to
"G × 10" position.
2. Connect tester leads to pick-up coil leads.
Tester (+) lead--White/Red lead
Tester (-)lead-~Black lead
3. Measure:
®Pick-up coil resistance
- ~ 27-:33~ at 20°C (68°F)
Out of
~ 1 Replace s°urce c°il" I
Out of
specification
~ 1 Replace pick-up coil.
6-22