Yamaha CE50T Service Manual page 146

ELEC ELECTRICAL STARTING SYSTEM
Main switch conduct check:
No
1. Disconnect main switch leads.
2. Set Pocket Tester (YU-03112) selector to
Continuity
=, I
"£t x 1" position. _" I Replace main switch.
3. Connect tester leads to main switch leads
(Red lead, Brown lead).
Tester (+)lead --*Red lead
Tester (-) lead-,Brown lead
4. Turn main switch to "ON" position.
Continuity
"START" switch conduct check:
1. Disconnect handlebarswitch (Right) leads. No
2. Set Pocket Tester (YU-03112) selector to Continuity _"1|
"_ × 1" position. Replace handlebar switch
3. Connect tester leads to "START" switch (Right).
leads (Black lead, Blue/White lead).
Tester ( + ) lead-_Blue/White lead
Tester (-) lead--Black lead
4. Push on "START" switch
--IF
[ ,
Continuity
6-9