How To Display A Route On The Ecdis Screen - Furuno FCR-2107 Operator's Manual

1. How to Monitor Routes
11.5

How to Display a Route on the ECDIS Screen

To display a monitored route, make sure that desired options of the monitored route (center line, channel borders,
leg marks and wheel over line) are chosen on the Route page of the Symbol Display dialog box.
11-4
To show this display, spin the scrollwheel to show Symbol Display/Info/ in the
mouse functions area, push the left mouse button then click an arrow tab to
display the Route menu.
• WPT mark enables display of a waypoint's number in a route.
• Leg marks enables display of planned speed and planned course to steer in a
route.
• Wheel over line enables display of a line that denotes turn start line for a
waypoint. This line appears when "WPT approach" is coming and disappears
when turning has started.
Do not set the following combinations of Center line, Channel limit and Safety
margin:
Center lines Channel limit
Off
Off
On
Safety margin
Off Off
On On
On On