How To Check And Prepare Route To Monitor - Furuno FCR-2107 Operator's Manual

6. ECDIS Overview
To store selections on the Alerts page, click the Start button. Also, the name of the user chart and the name of
Notes, which were selected as plan mode, are stored in this route.
How to recalculate timetable and ETA values
Timetable and ETA values can be recalculated from the Parameters page in the Plan Route menu. Minimally set
ETD to equal departure time, and perform desired optimization.
After checking the chart alerts and setting the ETD, cancel selection of the planned route in order to enable the
selection of it as the route to be monitored, using "Unselect" in the Plan Route menu, or use "Exchange with
Monitored" on the same sub menu to select it directly as monitored route.
6.2.3

How to check and prepare route to monitor

Select a route for the next voyage: Select Route in the sidebar and click the Monitor button. For more information
about route selection, see Chapter 11 Route Monitoring.
If the text "Checked conditions differ" appears in the menu, this means that conditions selected during route
planning were different than those selected for use during route monitoring.
6-12