Parameter-Related Menus - Furuno FCR-2107 Operator's Manual

19. Parameters Setup
19.1.1

Parameter-related menus

How to set time
Put the cursor on the date and time presentation on right-hand side of chart radar display.
•
Use the left button to display UTC time and local time alternately.
•
Use the right button to change time zone and/or time.
In order to set the time, the Kalman filter must be OFF.
Parameter backup
User can make backup copy of parameters. See Chapter 14 Backup Operations for details.
Installation parameters
The chart radar system parameters are set by the installation parameters.
Radar initialize
For radar initialization.
Note: Access to the installation and radar parameters requires a key disk, which is delivered by the manufacturer.
For details see the installation manual.
Navigation parameters
Parameters for your ship and routes. For more information about setting navigation parameters, see section 19.1.3
Navigation parameters setting.
Optimization parameters
This function is used to define parameters for speed and fuel consumption. For further details, see section 19.1.4
Optimization parameters setting.
Print navigation parameters
Prints navigation parameters to default printer.
Print optimization parameters
Prints optimization parameters to default printer.
19-2