Furuno FCR-2107 Operator's Manual page 140

5. AIS Operation
Basic AIS target data
From the control unit w/keyboard
1. Use the trackball to put the cursor on the AIS target symbol you want to know its data.
2. Press the TARGET DATA key.
By trackball
Use the trackball to put the cursor on an AIS target symbol then push the scrollwheel. The selected target is marked
with a broken square and AIS data is shown in the AIS data box when the target is correctly selected. Ship name is
shown near the target. If ship name is not available, MMSI no. appears.
Association data display, basic data
Detailed AIS target data
1. Use the trackball to put the cursor on the desired AIS target in the data box at the right side of the screen.
2. Push the left button to show detailed data.
The Targets dialog box shows information from AIS and TTs. Left hand side is data from AIS target and right hand
side data from TT.
Association data display, detailed data
5-20