How To Import Waypoint From Other Routes - Furuno FCR-2107 Operator's Manual

10. How to Plan Routes
10.4.8

How to import waypoint from other routes

You are able to choose waypoints from other routes to import them to current route. To import waypoints do the
following:
1. Put the cursor on Route in the sidebar then click Plan to open the Plan Route dialog box. Click the WPT tab to
open the WPT page. Check Enable changes.
2. Click the Import button. The following dialog box appears.
WPT IMPORT
WPT total
First WPT to copy
Number of WPTs
3. In the Copy from window, put the cursor in the Route box, spin the scrollwheel to choose the route from which
to copy waypoints then push the scrollwheel.
4. Enter first waypoint to copy in "First WPT to copy". Spin the scrollwheel to choose WPT number then push the
scrollwheel.
5. Enter number of waypoints to copy in "Number of WPTs". Spin the scrollwheel to choose desired number then
push the scrollwheel.
6. Enter where to import waypoints. To enter them after a WPT in a route, enter waypoint number in the "Copy
after WPT" box. If you want to enter them before a WPT in the route where WPTs will be imported, enter
waypoint number in the "Copy before WPT" box.
Spin the scrollwheel to choose desired number then push the scrollwheel.
7. Choose copying order, Direct or Reverse. "Direct" copies the waypoints in their original order; "Reverse"
copies them in reverse order. Spin the scrollwheel to choose desired option then push the scrollwheel.
8. Click the Copy button.
9. When finished, click X at top right corner of the dialog box to close the dialog box.
10-12
WPT total
Copy after WPT
Copy before WPT