How To Erase Track; Route Display - Furuno FCR-2119-BB Operation Manual

5. RADAR MAP AND TRACK
5.13.2

How to erase track

The display may become full of track when, for example, your ship traces the same
route several times. In this case you may want to delete some or all of your track from
the display.
1. Open the menu then select the [6 CHART DISPLAY] and [1 OWN TRACK]
menus.
2. Select [4 DELETE OWN TRACK].
3. Select the color to delete (B-type only), or the percentage of track to delete among
[30%], [50%], [80%] and [ALL].
4. Close the menu.
5.14

Route Display

The route selected for navigation (in the chart mode) can be
shown on the radar display. You can show or hide the entire
route, and show or hide elements of the route (channel lim-
its, safety margin, leg marks and wheel over line).
1. Right-click the [Mark] box then select [Map•Mark Menu]
and [3 ROUTE].
2. Turn the route display on or off at [1 DISP ROUTE].
3. Turn the XTD limit, safety margin, leg marks and wheel
over line displays on or off at [2 SEL ROUTE OBJECT].
* Wheel over line (WOL)
Direction of
movement
WOL for next section
Case 1: Normal
4. Close the menu.
5-14
Wheel over
line*
WPT1
124.8°
0.8NM
WOL
XTD
limit
WPT2
87.9°
Leg mark
1.2NM
Direction of
WOL
movement
Vertical WOL for the current interval
Case 2: Angle for next section is narrow (Not 20 deg)
Safety
margin