Resetting Position Alignment - Furuno FCR-2107 Operator's Manual

15. Navigation Sensors
You can see range and
bearing of the offset in the
Posn page of the Sensors
dialog box.
The indication Offset appears
in reverse video on the chart
radar display.
15.6.3

Resetting position alignment

To reset position alignment, proceed as follows:
1. Open the Sensors dialog box then open the Position page.
2. Uncheck "Chart Align".
.
3. Check that the indication Offset is not shown in the upper part of the information area, to the right of the
position source indication.
HDG 071.0
SPD (WT) 15.6 kn
SB (POSN) 0.0 kn
COG (POSN) 071.0
SOG (POSN) 15.6 kn
59°31.206'N
024°36.731'E
WGS 84
DGPS
15-12
°
°