File Operations; Floppy Disk Operations - Furuno FCR-2107 Operator's Manual

14. Backup Operations
14.2

File Operations

How to copy a file
You can make a copy of an original file using the Copy function in the Backup & Restore dialog box. To copy a file,
do the following:
1. Choose desired file category.
2. Choose desired file from the Hard Disk field.
3. Click the Copy button.
4. Enter new name for chosen file then click the OK button.
How to rename a file
You can rename a file using the Rename function in the Backup & Restore dialog box. To rename a file, do the
following:
1. Choose desired file category from the Category field.
2. Choose desired file from the Hard Disk field.
3. Click the Rename button.
4. Enter new name for chosen file then click the OK button.
How to delete a file
You can delete a file as follows:
1. Choose desired file category.
2. Choose desired file from the Hard Disk field.
3. Click the Delete button.
14.3

Floppy Disk Operations

How to back up a file to a floppy disk
You can make a backup from an original file to a floppy disk. To make a backup of a file to a floppy disk, insert a
floppy disk in the disk drive, then do the following:
1. Choose desired file category.
2. Choose desired file from the Hard Disk field.
3. Choose desired Drive from the Drive field.
4. Click the Backup button.
How to read a file from a floppy disk
You can restore a file with one stored on a floppy disk. To restore a file stored on a floppy disk, do the following:
1. Choose desired file category.
2. Choose desired Drive from the Drive field.
3. Choose desired file from the Backup Device field.
4. Click the Restore button.
14-2