Furuno FCR-2107 Operator's Manual page 407

Alert number 207:
------------------------------------
FAILURE INSIDE ECDIS PROCESSOR
BETWEEN DLL INTERFACE SW AND ECDIS
SOFTWARE. SWITCH POWER ON/OFF AND
REINSTALL ECDIS SW.
Alert number 209:
------------------------------------
FAILURE TO RECEIVE RADAR ECHO DATA
FROM ARPA PROCESSOR OVER LAN
CONNECTION CHECK LAN CONNECTORS AND
CABLES. SWITCH POWER ON/OFF AND
REINSTALL ECDIS SW.
Alert number 210:
Alert number 211:
Alert number 212:
Alert number 213:
Alert number 214:
Alert number 215:
Alert number 216:
Alert number 217:
Alert number 218:
Alert number 219:
Alert number 220:
Alert number 150:
------------------------------------
NO HEADLINE AVAILABLE FOR RADAR
OVERLAY.
CABLING FOR RADAR OVERLAY
Alert number 151:
------------------------------------
NO AZIMUTH
OVERLAY.
CABLING FOR RADAR OVERLAY
Alert number 152:
------------------------------------
NO TRIGGER AVAILABLE FOR RADAR
OVERLAY.
CABLING FOR RADAR OVERLAY
LAN RADAR DLL FAILURE
RADOV NO ECHODATA
TT dangerous target
---------------------------------------
TT Target in ACQ ZONE
---------------------------------------
TT lost target
---------------------------------------
Radar STBY Warning
---------------------------------------
TT Auto ACQ 100% full
---------------------------------------
TT Auto ACQ 95% full
---------------------------------------
TT Man ACQ 100% full
---------------------------------------
TT Man ACQ 95% full
---------------------------------------
TT System error
---------------------------------------
Radar CPU Warning
---------------------------------------
TT lost REF target
---------------------------------------
RADOV NO HEADLINE
CHECK CONNECTORS AND
RADOV NO AZIMUTH
AVAILABLE FOR RADAR
CHECK CONNECTORS AND
RADOV NO TRIGGER
CHECK CONNECTORS AND
5/12
7/14
2/9
6/13
6/13
13/13
6/13
7/14
6/13
7/14
13/13
6/13
6/13
6/13
6/13
20. Alerts
20-17