Furuno FCR-2107 Operator's Manual page 151

How to open the sidebar on the display
Sidebar(s) may be opened as shown below. Two sidebars may be displayed.
1. Put the cursor on the area shown.
2. "Select Sidebar" appears in the guidance area. See
figure at right.
3. Push the right button to show the sidebar menu on the
display.
4. Spin the scrollwheel to choose desired sidebar from
the menu then push the scrollwheel.
To remove an item from the sidebar, deselect it
following this procedure.
6. ECDIS Overview
(WT)
OFF
T VECT(G) 5 min
Predictor OFF
PASTPOSN T 2min
CPA 10.0NM 30min
CPA AUTO act FILT
Lost TGT alarm FILT
SINGLE xx.xx xx.xx
1.
3.
2.
6-5