Furuno FCR-2107 Operator's Manual page 400

20. Alerts
Alert number 701:
------------------------------------
B-ADAPTER DOES NOT OPERATE DUE TO A
SYSTEM FAULT. SWITCH OFF MAIN
CIRCUIT BREAKER AND THEN ON AGAIN.
CALL SERVICE IF FAILURE STILL EXISTS
Alert number 705:
------------------------------------
GYRO1 DATA IS NOT RECEIVED CORRECTLY
USE 'INITIAL SETTINGS' MENU TO SET
GYRO AGAIN. IF FAILURE STILL
EXISTS, USE 'SENSORS' SPEED/POSITION
PAGE TO CHOOSE VALID SENSORS.
Alert number 708: LOG ERROR
--------------------------------------------------------------
LOG DATA IS NOT RECEIVED
CORRECTLY
USE 'SENSORS' SPEED/COURSE
PAGE TO CHOOSE VALID
Alert number 709:
------------------------------------
DUAL AXIS LOG DATA IS NOT RECEIVED
CORRECTLY. USE SPEED/COURSE PAGE
TO CHOOSE VALID SPEED SENSORS.
Alert number 710:
------------------------------------
ECHO SOUNDER DATA IS NOT RECEIVED
CORRECTLY.
VERIFY ECHO SOUNDER OPERATION.
Alert number 711:
------------------------------------
WIND SENSOR DATA IS NOT RE CEIVED
CORRECTLY.
VERIFY WIND SENSOR OPERATION.
Alert number 712:
------------------------------------
POSITION EQUIPMENT 1 DATA IS NOT
RECEIVED CORRECTLY. USE 'SENSORS'
POSITION TO CHOOSE VALID POS SENSOR.
Alert number 713:
------------------------------------
POSITION EQUIPMENT 2 DATA IS NOT
RECEIVED CORRECTLY. USE 'SENSORS'
POSITION TO CHOOSE VALID POS SENSOR.
Alert number 714:
------------------------------------
POSITION EQUIPMENT 3 DATA IS NOT
RECEIVED CORRECTLY. USE 'SENSORS'
POSITION TO CHOOSE VALID POS SENSOR.
Alert number 715:
------------------------------------
POSITION EQUIPMENT 4 DATA IS NOT
RECEIVED CORRECTLY. USE 'SENSORS'
POSITION TO CHOOSE VALID POS SENSOR.
Alert number 716:
------------------------------------
POSITION EQUIPMENT 5 DATA IS NOT
RECEIVED CORRECTLY. USE 'SENSORS'
POSITION TO CHOOSE VALID POS SENSOR.
20-10
B-ADAPTER ERROR
GYRO ERROR
/5/12
SENSORS.
DUAL AXIS LOG (BT) ERROR
ECHO SOUNDER ERROR
WIND SENSOR ERROR
POSITION EQUIPMENT ERROR
POSITION EQUIPMENT ERROR
POSITION EQUIPMENT ERROR
POSITION EQUIPMENT ERROR
POSITION EQUIPMENT ERROR
/6/13
/5/12
708: DUAL AXIS LOG (WT) ERROR
DUAL AXIS LOG DATA IS NOT RECEIVED
CORRECTLY.
USE 'SENSORS' SPEED/COURSE
PAGE TO CHOOSE VALID
SENSORS.
/5/12
/6/13
/6/13
/5/12
/5/12
/5/12
/5/12
/5/12
/5/12