How To Sleep Targets; How To Sleep An Activated Ais Target; How To Sleep All Activated Ais Targets - Furuno FCR-2107 Operator's Manual

5. AIS Operation
5.7

How to Sleep Targets

5.7.1

How to sleep an activated AIS target

You can "sleep" an activated AIS target as below when the screen becomes filled with targets that might prevent
important radar and AIS displays from being identified. Note that targets that have been activated automatically
cannot be "slept."
1. Use the trackball to put the cursor on the activated AIS target that you want to sleep.
2. Push the scrollwheel. The selected target symbol is then enclosed in a dashed square and AIS data is displayed
in the AIS data box.
Sleeping target
3. Uncheck ship name you want to sleep.
5.7.2

How to sleep all activated AIS targets

1. Use the trackball to select the AIS DISP box at the right side of the screen.
2. Push the right button to open the AIS TARGET menu.
AIS TARGET menu
3. Spin the scrollwheel to select Sleep All Targets then push the left button or the scrollwheel.
5-8