How To Find Chart Alerts Leg By Leg - Furuno FCR-2107 Operator's Manual

9.4.2

How to find chart alerts leg by leg

After you have done chart alert calculation, the system is able to show you legs on the route where danger areas are
located. All the alerts for each leg where alerts occur are shown in the Alerts list. The list of alerts is based on
selections made in the Chart alert parameters sub menu. To find chart alerts by route leg, do the following:
1. In the Check page of the Plan Route dialog box, the Alerts by leg field has a selection box where you can
choose desired leg number.
Alerts by leg
Alerts by leg
Alerts:
2. Choose the Alert from the Alerts by leg field then click Locate leg button. The system will display chosen leg
on the electronic chart area as shown below.
9-10
Legs by alert
Alerts: 11
Legs by alert
Alert:
Planned Notes
9. Chart Alerts