LED/power switch removal
Note: The illustrations in this documents might differ slightly from your hardware.
To remove the LED/power switch, do the following:
1. Power-off the system.
2. Unplug the system.
3. Remove the cover (see "Removing the cover and front bezel" on page 47).
4. Remove the front bezel (see "Removing the cover and front bezel" on page 47).
5. Disconnect connector from planar.
6. Remove the LED/power switch screw.
7. Gently lift the LED/power switch up and out.
76
Hardware Maintenance Manual: IBM IntelliStation M Pro Type 6233 and 6850
Note: Before performing any removals, read "Safety information" on page 103 and "Before
you begin" on page 43.