Table of Contents
Advertisement
Beep/Symptom
One Long and Two Short Beeps
Two Long and Two Short Beeps
No beep symptoms
No Beep Symptom
No beep and the system
operates correctly.
No Beeps occur after
successfully completing
POST
No ac power
No beep and no video
Diagnostic error codes
Note: In the following error codes, if XXX is 000, 195, or 197, do not replace a
Error Code/Symptom
001-XXX-000
(Failed core tests)
001-XXX-001
(Failed core tests)
001-250-000
(Failed System Board ECC)
001-250-001
(Failed System Board ECC)
005-XXX-000
(Failed Video test)
86
Hardware Maintenance Manual: IBM IntelliStation M Pro Type 6233 and 6850
FRU/Action
1. Check speaker cables
2. Speaker
3. System board
1. Check speaker connections
2. Speaker
3. System board
1. Check the power cord.
2. Power supply.
1. See "Undetermined problems" on page 96
FRU. The description for these error codes are:
000
The test passed.
195
The Esc key was pressed to abort the test.
197
This is a warning error and may not indicate a hardware failure.
For all error codes, replace/follow the FRU/Action indicated.
FRU/Action
1. System Board
1. System Board
1. System Board
1. System Board
1. Video Adapter (if installed)
2. System Board
FRU/Action
1. Video adapter (if present)
2. System Board
1. Video adapter
Advertisement
Table of Contents
