FRU information (service only)
Field Replacement Units (FRUs) should be replaced by qualified service personnel
only.
CD-ROM drive removal
Note: The illustrations in this documents might differ slightly from your hardware.
To remove the CD-ROM drive, do the following:
1. Power-off the system.
2. Remove the cover (see "Removing the cover and front bezel" on page 47).
3. Remove the cables.
4. Remove the (2) screws.
5. Gently slide the CD-ROM drive out
© Copyright IBM Corp. 2002
Note: Before performing any removals, read "Safety information" on page 103 and "Before
you begin" on page 43.
73