9. Replace the memory board and any adapters that were removed to gain
access to the battery.
10. Install the cover. See "Completing the installation" on page 71.
11. Plug in the power cord.
Note: When the computer is turned on for the first time after battery
replacement, an error message might be displayed. This is normal after
the battery is replaced.
12. Turn on the computer and all attached devices.
13. See "Using the Configuration/Setup Utility program" on page 33 to set the date
and time and any passwords.
14. Dispose of the old battery as required by local ordinances or regulations.
31
Diagnostics