IBM IntelliStation M Pro 6233 Hardware Maintenance Manual page 12

If the Power Management feature is enabled, do the following:
1. Start the Configuration/Setup Utility program (see "Setup Utility program" on
2. Select Power Management from the Configuration/Setup Utility program menu.
3. Select APM.
4. Be sure APM BIOS Mode is set to Disabled. If it is not, press Left Arrow (") or
5. Select Automatic Hardware Power Management.
6. Set Automatic Hardware Power Management to Disabled.
7. If the problem persists, continue to 003 .
Run the Diagnostic programs. If necessary, refer to "Running diagnostics tests" on
page 19.
v If you receive an error, replace the part that the diagnostic program calls out or
v If the test stops and you cannot continue, replace the last device tested.
2
Hardware Maintenance Manual: IBM IntelliStation M Pro Type 6233 and 6850
002
page 17.)
Right Arrow (") to change the setting.
003
go to "Diagnostics" on page 18.