Speaker removal
Note: The illustrations in this documents might differ slightly from your hardware.
To remove the speaker, do the following:
1. Power-off the system.
2. Unplug the system.
3. Remove the cover (see "Removing the cover and front bezel" on page 47)
4. Disconnect the cables from system board.
5. Remove the front bezel.
6. Remove the speaker screws (2).
7. Gently pull the speaker outward.
Note: Before performing any removals, read "Safety information" on page 103 and "Before
you begin" on page 43.
FRU information (service only)
79