3Com 4210 PWR Configuration Manual page 248

246 C 21: AAA C
HAPTER
Creating an ISP Domain
and Configuring Its
Attributes
n
ONFIGURATION
Table 182 Create an ISP domain and configure its attributes
Operation
Enter system view
Configure the form of the
delimiter between the user
name and the ISP domain
name
Create an ISP domain or set
an ISP domain as the default
ISP domain
Set the status of the ISP
domain
Set the maximum number of
access users that the ISP
domain can accommodate
Set the idle-cut function
Set the accounting-optional
switch
Set the messenger function
Set the self-service server
location function
Note that:
On the Switch 4210, each access user belongs to an ISP domain. You can
■
configure up to 16 ISP domains on the switch. When a user logs in, if no ISP
domain name is carried in the user name, the switch assumes that the user
belongs to the default ISP domain.
If you have configured to use "." as the delimiter, for a user name that contains
■
multiple ".", the first "." will be used as the domain delimiter.
If you have configured to use "@" as the delimiter, the "@" must not appear
■
more than once in the user name.
If the system does not find any available accounting server or fails to
■
communicate with any accounting server when it performs accounting for a
user, it does not disconnect the user as long as the accounting optional
Command
system-view
domain delimiter { at | dot } Optional
domain { isp-name | default {
disable | enable isp-name } }
state { active | block }
access-limit { disable |
enable max-user-number }
idle-cut { disable | enable
minute flow }
accounting optional
messenger time { enable
limit interval | disable }
self-service-url { disable |
enable url-string }
Remarks
-
By default, the delimiter
between the user name and
the ISP domain name is "@".
Required
If no ISP domain is set as the
default ISP domain, the ISP
domain "system" is used as
the default ISP domain.
Optional
By default, an ISP domain is in
the active state, that is, all
the users in the domain are
allowed to request network
service.
Optional
By default, there is no limit on
the number of access users
that the ISP domain can
accommodate.
Optional
By default, the idle-cut
function is disabled.
Optional
By default, the
accounting-optional switch is
off.
Optional
By default, the messenger
function is disabled.
Optional
By default, the self-service
server location function is
disabled.