Ipv6 Configuration Task List - 3Com 4210 PWR Configuration Manual

9/18/26 port and pwr 9/18/26 port 4210 series switch
Table of Contents

Advertisement

532
C
46: IP
6 M
HAPTER
V
Introduction to IPv6 DNS
Protocols and Standards
IPv6 Configuration
Task List
Configuring an IPv6
Unicast Address
C
ANGEMENT
ONFIGURATION
In the IPv6 network, a domain name system (DNS) supporting IPv6 converts
domain names into IPv6 addresses. Different from an IPv4 DNS, an IPv6 DNS
converts domain names into IPv6 addresses, instead of IPv4 addresses.
However, just like an IPv4 DNS, an IPv6 DNS also covers static domain name
resolution and dynamic domain name resolution. The function and
implementation of these two types of domain name resolution are the same as
those of an IPv4 DNS. For details, refer to "DNS Configuration" on page 549.
Usually, the DNS server connecting IPv4 and IPv6 networks contain not only A
records (IPv4 addresses) but also AAAA records (IPv6 addresses). The DNS server
can convert domain names into IPv4 addresses or IPv6 addresses. In this way, the
DNS server has the functions of both IPv6 DNS and IPv4 DNS.
Protocol specifications related to IPv6 include:
RFC 1881: IPv6 Address Allocation Management
RFC 1887: An Architecture for IPv6 Unicast Address Allocation
RFC 1981: Path MTU Discovery for IP version 6
RFC 2375: IPv6 Multicast Address Assignments
RFC 2460: Internet Protocol, Version 6 (IPv6) Specification.
RFC 2461: Neighbor Discovery for IP Version 6 (IPv6)
RFC 2462: IPv6 Stateless Address Autoconfiguration
RFC 2463: Internet Control Message Protocol (ICMPv6) for the Internet
Protocol Version 6 (IPv6) Specification
RFC 2464: Transmission of IPv6 Packets over Ethernet Networks
RFC 2526: Reserved IPv6 Subnet Anycast Addresses
RFC 3307: Allocation Guidelines for IPv6 Multicast Addresses
RFC 3513: Internet Protocol Version 6 (IPv6) Addressing Architecture
RFC 3596: DNS Extensions to Support IP Version 6
Table 386 Complete these tasks to configure IPv6:
Task
"Configuring an IPv6 Unicast Address"
"Configuring IPv6 NDP"
"Configuring a Static IPv6 Route"
"Configuring IPv6 TCP Properties"
"Configuring the Maximum Number of IPv6 ICMP Error Packets Sent
within a Specified Time"
"Configuring IPv6 DNS"
"Displaying and Maintaining IPv6"
An IPv6 address is required for a host to access an IPv6 network. A host can be
assigned a global unicast address, a site-local address, or a link-local address.
Remarks
Required
Optional
Optional
Optional
Optional
Optional
Optional

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents