Ftp Configuration - 3Com 4210 PWR Configuration Manual

430 C 38: FTP
HAPTER
Introduction to SFTP

FTP Configuration

FTP Configuration: A
Switch Operating as an
FTP Server
SFTP C
AND ONFIGURATION
Secure FTP (SFTP) is established based on an SSH2 connection. It allows a remote
user to log in to a switch to manage and transmit files, providing a securer
guarantee for data transmission. In addition, since the switch can be used as a
client, you can log in to remote devices to transfer files securely.
Table 326 FTP configuration tasks
Item
"FTP Configuration: A Switch
Operating as an FTP Server"
"FTP Configuration: A Switch
Operating as an FTP Client"
Creating an FTP user
Configure the user name and password for the FTP user and set the service type to
FTP. To use FTP services, a user must provide a user name and password for being
authenticated by the FTP server. Only users that pass the authentication have
access to the FTP server.
Table 327 Create an FTP user
Operation
Enter system view
Add a local user and enter
local user view
Configure a password for the
specified user
Configure the service type as
FTP
Enabling an FTP server
Table 328 Enable an FTP server
Operation
Enter system view
Enable the FTP server function ftp server enable
n
Only one user can access the Switch 4210 at a given time when the latter
■
operates as an FTP server.
Configuration task
"Creating an FTP user"
"Enabling an FTP server"
"Configuring connection idle
time"
"Configuring the banner for
an FTP server"
"Displaying FTP server
information"
"Basic configurations on an
FTP client"
Command
system-view
local-user user-name
password { simple | cipher }
password
service-type ftp
Command
system-view
Description
Required
Required
Optional
Optional
Optional
-
Description
-
Required
By default, no local user is
configured.
Optional
By default, no password is
configured.
Required
By default, no service is
configured.
Description
-
Required
Disabled by default.